| LOOMEFI-01 | Engine Management loom to suit Holden Series 1 & 2 V6 Commodore Engines
|
$600 c/o
|
|
|
| LOOMEFI-08 | Engine Management loom to suit Holden V6 Ecotec Engines
|
$700 c/o
|
|
|
| LOOMEFI-03 | Engine Management loom to suit Holden VN-VP V8 Engines
|
$600 c/o
|
|
|
| LOOMEFI-04 | Engine Management loom to suit Holden VR-VS V8 Engines
|
$700 c/o
|
|
|
| LOOMEFI-15 | Engine Management loom to suit Holden VT V8 Manual & Auto Engines
|
$700 c/o
|
|
|
| MEMCAL-VT/V8 | Re-programmed Memcal to Delete Vehicle Anti-Theft System (VATS) & Calibrated to suit conversion.
|
$450c/o
|
|
|
| MEMCAL-VT/V6 | Re-programmed Memcal to Delete Vehicle Anti-Theft System (VATS) & Calibrated to suit conversion.
|
$450c/o
|
|
|
| MEMCAL-VR/V6 Man | Re-Programmed Memcal to Delete Vehicle Anti-Theft System (VATS) & Calibrated to suit Conversion.
|
$450c/o
|
|
|
| MEMCAL-VR/V6 AUTO | Re-programmed Memcal to Delete Vehicle Anti-Theft System (VATS) & Calibrated to suit conversion.
|
$450c/o
|
|
|
| LOOMS/S-01 | Speed Sensor assembly & Loom with speedo cable provision. Suit T-700 Auto Trans.
|
$250
|
|
|
| LOOMS/S-02 | Speed Sensor assembly & Loom with speedo cable provision. Suit T-350-400. Powerglide Auto Trans.
|
$200
|
|
|
| SC-01 | Speedo Cable.
|
$60
|
|
|
| B0580464070 | Hi-pressure EFI fuel pump
|
$195
|
|
 |
|
| BF-5030 | Hi-pressure fuel filter
|
$20
|
|
|
|
| ST-4 | EFI Surge Tank
|
$150
|
|
|
|
| GENIII-WELD RING/MS | EFI Fuel Pump Weld Ring. Weld to Mild Steel tanks - suits VT Commodore in-tank fuel pump.
|
$132
|
|
|
|
| 10229 | EFI Fuel Pump. Includes swirl pot. In-tank application to be used with GENIII-WELD RING
|
$250
|
|
| | 10229 | Holden Commodore VT 5Ltr & V6 In-tank Fuel Pump Assembly.
|
$255
|
|
|
|
| FAN-VTCOMM | VT COMMODORE TWIN THERMO FAN ASSEMBLY. FACTORY REPLACEMENT UNIT. IDEAL FOR ENGINE CONVERSIONS
|
$250
|
|
|
| FAN-EF4026 | 16'' 2100cfm UNIVERSAL FAN
|
$180
|
|
|
| SUMP-04B | V6 Commodore suit early Holdens and Toranas. Reversed Sump including Pickup
|
$660
|
|
|
|
| SUMP-28 | V6 Reversed Sump. Suit Holden EH TO HR and Torana LC TO LX Brand new unit. Need to supply old oil pickup as change over
|
$550 c/o
|
|
|
|
| CH-EM60 | FJ TO EH HOLDEN WITH COMMODORE V6 ENGINE (INCLUDES RUBBERS) ( Use with Sump 04A-V6 Ecotec or Sump-04B Non Ecotec)
|
$200
|
|
|
| CH-EM75 | HI-LUX WITH COMMODORE V6 ECOTEC
|
$225
|
|
|
| XMVBK308TH400 | Holden VB-VK Commodore with T-400 Auto Transmission
|
$187
|
|
|
| Error - No Match for XMVBK308TH700 |
| XMVBK308TH350 | Holden VB-VK Commodore with T-350 Auto Transmission
|
$187
|
|
|
| XMVBK308T56 | Holden VB-VK Commodore with T56 Tremec Manual Transmission
|
$187
|
|
|
| A1158 | Transmission rubber mount to suit T700 and T5
|
$44
|
|
|
|
| Error - No Match for CH-9 |
| CH-58 | COMMODORE VB-VK 308/304 EFI HEADS TRI-Y DESIGN 1 3/4'' PRIM. (will fit Hi-Energy Sump Most Autos and Manual)
|
$700
|
|
|
|
| SPEEDO-1 | Holden HJ to HZ Electronic Speedo and Tacho conversion.
|
$880
|
|
|
|
| G/R-03/1.9 | 253-308 V8 Holden. Suit Manual and Automatic trans. 1.9HP / 1.4KW
|
$330
|
|
|
|
| G/R-03/2.5 | 253-308 V8 Holden. Suit Manual and Automatic trans. 2.5HP
|
$410
|
|
|
|
| G/R-03/6C1.9 | 6 Cylinder Holden. 1.9HP / 1.4KW
|
$355
|
|
|
|
| G/R-03/6C2.5 | 6 Cylinder Holden. 2.5HP
|
$440
|
|
|
|
| G/R-03/V6A | V6 3.8ltr Commodore Engine. Standard Replacement suit Auto
|
$180
|
|
|
|
| G/R-03/V6M1.9 | V6 3.8ltr Commodore Engine. Suit Manual trans. (10 Tooth pinion)
|
$350
|
|
|
|
|
E.F.I.
Wiring Kits for VB-VL Holden fitted with Series 1, Series 2 or
Ecotech Holden 3.8 Litre V6 or V8 EFI Engine and Transmission.
Customer
Details
For the V6 application, you
must use the changeover front crossmembers and a special right
hand side engine mount. The motor and gearbox then bolts in
without reworking the floor, sump, shifter or tailshaft. The
ECM is mounted back in the original position (LHS kick panel)
or above the glove box.
With a VK-VL
Commodore you may have to send us your original engine loom as
it unplugs from the firewall near the power booster and
underneath the plastic fuse box on passenger side and the
original fuse box (see pic below) that is mounted LHS inner
fender at rear.
Our wiring loom
is supplied on a changeover basis for the engine to computer
loom. If no changeover is supplied an additional cost of $200
will apply.
Prices may vary
if Ecotec engine is used.
|
All Prices in $Au
including GST. Overseas orders will be lower.
Back to the EFI wiring page
 -
|
)
)
)
)
)
)
)
)
)
','$700'))
)
)
)
)
)
)
','$350'))